Tektronix TBS1052C handleiding
Handleiding
Je bekijkt pagina 78 van 146
Analyzing a waveform
Taking automatic measurements
Automatic measurements are a way to quickly take common measurements on a waveform, such as signal frequency, period, rise and fall
times, and so on. You can take up to a total of six measurements at once, on any combination of input channels and a math waveform. The
measurements are shown on the main screen in the order they were selected.
To take an automatic measurement:
Acquire and display a
triggered waveform.
Push Measure.
Push the side-menu button to
select the channel on which to
take measurements.
Use the Multipurpose
knob to select and
click a measurement.
See Automatic measurement
descriptions on page 82.
The Measurement Selection
bar at the top of the screen
updates to show that a
measurement was selected for
that channel (indicated by
color), up to a maximum of six
measurements total to display
.
Measurements with a down
triangle contain a list of the
input channels to use for that
measurement when selected.
Select and click the input
Analyzing a waveform
TBS1000C Series Oscilloscopes User Manual 80
Bekijk gratis de handleiding van Tektronix TBS1052C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tektronix |
| Model | TBS1052C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35612 MB |