Tektronix TBS1052C handleiding
Handleiding
Je bekijkt pagina 32 van 146
Getting acquainted with the oscilloscope
Powering the oscilloscope
Grounding the oscilloscope is necessary for safety and to take accurate measurements. The oscilloscope must share the same ground as
any circuits that you are testing. Y
ou connect the oscilloscope to ground by plugging the three-pronged power cord into an outlet grounded
to earth ground.
To power the oscilloscope on:
1. Connect the power cord supplied with the instrument to the oscilloscope power connector.
2. Connect the power cord to the appropriate AC main source.
3. Push the Power button on the top.
To power off the oscilloscope on: cord :
1. Push the Power button on the top.
2. Disconnect the power cord from the main source and the oscilloscope power connector
.
Getting acquainted with the oscilloscope
TBS1000C Series Oscilloscopes User Manual 34
Bekijk gratis de handleiding van Tektronix TBS1052C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tektronix |
| Model | TBS1052C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 35612 MB |