Teka WMK 40740 WH handleiding
Handleiding
Je bekijkt pagina 5 van 119
SAFETY INSTRUCTIONS
•Do not operate the machine in rooms with a temperature of below 5°C.
This can cause damages to parts of it. If it is unavoidable, make sure to
drain the water completely from the appliance after every use (see
„Maintenance - Cleaning of drain pump filter“) to avoid damages caused
by frost.
•Never use flammable sprays or substances in the immediate proximity
of the appliance.
INSTALLATION
•Remove all packaging material and transport bolts before using the
appliance. Otherwise, serious damage may result.
•This appliance is equipped with a single inlet valve and can be connected
to the cold water supply only.
•Mains plug must be accessible after installation.
•Before washing clothes for the first time, the product shall be operated
once throughout all the procedures without any clothes inside.
•Before using the washer, the product shall be calibrated.
•Do not put any excessively heavy objects on the appliance, like water
containers or heating devices.
•The new hose-sets supplied with the appliance are to be used and that
old hose-sets should not be reused.
•Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.05 MPa.
ELECTRICAL CONNECTION
•Make sure the supply cable is not trapped by the machine, it can get
damaged.
•Connect the product to a grounded outlet protected by a fuse
complying with the values in the “ Technical specifications“ table.
The grounding installation has to be made by a qualified electrician.
Ensure that the machine is installed in accordance with the local
regulations.
4
Bekijk gratis de handleiding van Teka WMK 40740 WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | WMK 40740 WH |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 13337 MB |
