Teka SHS 100 handleiding
Handleiding
Je bekijkt pagina 36 van 48
4.
The heater can be installed, anywhere in the house not exposed to direct
sunlight or rain. However, in order to reduce the pipeline heat losses, the
installation position of the heater shall be closed to the location for use of
water as near as possible.
The dimension of each pipe part is G1/2.
Connection of one-way safety valve:install the one-way safety valve
attached with the machine at the water inlet of the main machine.(Pay
attention to keep the installed drainage flexible pipes of the safety valve
sloping downwards and connected with the atmosphere.)
In order to avoid leakage when connecting the pipelines, the rubber seal
gaskets provided with the machine must be added at the end of the threads
(see Fig.4).
1.
2.
3.
(Fig.4)
Hot water outlet
Cold water inlet
Rubber seal gaskets
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Adjusting handle for
mixing valve
Hot water
Rubber seal gaskets
Power cord
4. If the users want to make a multi-way supply system, refer to the method
shown in Fig.5 for connection of the pipelines.
4
Bekijk gratis de handleiding van Teka SHS 100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | SHS 100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5373 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Kleur van het product | Wit |
| Ingebouwd display | Ja |
| Gewicht | 38380 g |
| Breedte | 570 mm |
