Teka RVI 10024 GBK handleiding
Handleiding
Je bekijkt pagina 28 van 80

INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
Remove the exterior and interior packing.
Before connecting the Wine cooler to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
When disposing your appliance, please choose an authorized disposal site.
Installation of Your Wine Cooler
This appliance is designed to be for in column (fully recessed) (Refer to sticker
location the back of this appliance).
This appliance is intended to be used exclusively for the storage of wine.
Place your Wine cooler on a floor that is strong enough to support it when it is fully
loaded.
This appliance is using flammability refrigerant. So never damage the cooling pipe
work during the transportation. Locate the Wine cooler away from direct sunlight and
sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption. Extreme cold
ambient temperatures may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug the Wine cooler into an exclusive, properly installed-grounded wall outlet. Do
not under any circumstances cut or remove the third (ground) prong from the power
cord. Any questions concerning power and/or grounding should be directed toward a
certified electrician or an authorized Products service center.
Attention
Store wine in sealed bottles;
Do not overload the wine cooler;
Do not open the door unless necessary;
Do not cover shelves with aluminum foil or any other shelf material which may
prevent air circulation;
Should the Wine cooler be stored without use for long periods it is suggested, after a
careful cleaning, to leave the door ajar to allow air to circulate inside the wine cooler
in order to avoid possible formations of condensation, mold or odors.
Ambient Room Temperature Limits
This appliance is designed to operate in ambient temperatures specified by its temperature
class marked on the rating plate.
Class
Symbol
Ambient Temperatures range(℃)
Extended Temperate
SN
﹢10 to﹢32
Temperate
N
﹢16 to﹢32
Subtropical
ST
﹢16 to﹢38
Tropical
T
﹢16 to﹢43
Replaceable (LED only) light source by a professional
This product contains a light source of energy efficiency class G.
26
Bekijk gratis de handleiding van Teka RVI 10024 GBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | RVI 10024 GBK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10457 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Vrijstaand |
| Soort bediening | Knoppen |
| Deurscharnieren | Rechts |
| Ingebouwd display | Ja |
| Gewicht | 29000 g |







