Handleiding
Je bekijkt pagina 10 van 75
8
EN
Install Instruction
7. Put the refrigerating door on the middle
hinge , install the upper hinge, hinge cover
and hole cap.
ATTENTION
Dierences: Due to technical changes and
dierent models, some of the illustrations in this
manual may dier from your model.
Leveling feet
To avoid vibration, the appliance must be
leveled.
If required, adjust the leveling feet to
compensate for the uneven floor.
The front should be slightly higher than the
rear to aid in door closing.
Leveling feet can be turned easily by tipping
the cabinet slightly.
Turn the leveling feet counter clockwise
to raise the unit, clockwise to lower it.
Changing the light
Any replacement or maintenance of the
LED lamps is intended to be made by the
manufacturer, its service agent or similar
qualified person.
This product contains a light source of energy
efficiency class (F).
After connecting the power supply cord (or plug)
to the outlet, wait 2 or 3 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Moving the appliance
1. Remove all items from the appliance.
2. Pull the power plug out, insert and fix it
into the power plug hook at the rear or on
top of the appliance.
3. Tape parts such as shelves and the door
to prevent from falling off while moving
the appliance.
4. Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
Tips for energy saving
Do not place the appliance near cookers,
radiators or other heat sources. If the
ambient temperature is high, the compressor
will run more frequently and for longer,
resulting in increased energy consumption.
Ensure that there is sufficient ventilation at
the base of the appliance, on the sides of the
appliance and at the back of the appliance.
Please also observe the spacing dimensions
in the chapter “Installation”.
The arrangement of drawers, shelves and
trays as shown in the product overview
offers the most efficient use of energy and
should be retained as far as possible.
To obtain a larger storage space (e.g. for
large refrigerated/frozen goods), the middle
drawers and shelves can be removed. The
top and bottom drawers and shelves should
be removed last if necessary.
An evenly filled refrigerator/freezer
compartment contributes to optimal energy
use.
Allow warm food to cool before placing it in
the refrigerator/freezer compartment. Food
that has already cooled down increases
energy efficiency.
Allow frozen food to defrost in the
refrigeration compartment The coldness
of the frozen food reduces the energy
consumption in the refrigerator
compartment and thus increases the energy
efficiency.
Open the door only as briefly as necessary
to minimise cold loss. Opening the door
briefly and closing it properly reduces
energy consumption.
Setting the temperature no colder than
necessary contributes to optimal energy use.
The door gaskets of your appliance must
be perfectly intact so that the doors close
properly and energy consumption is not
increased unnecessarily.
Hole Cap
Upper Hinge
Hinge Cover
Bekijk gratis de handleiding van Teka RBF 44630, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | RBF 44630 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 9564 MB |
