Handleiding
Je bekijkt pagina 22 van 94
TROUBLE SHOOTING
The following simple issues can be handled by the user. Please call the after-sale service
department if the issues are not solved.
Problem Possible Causes Solution
Not operate
• The power supply is not turned on and the
plug is not firmly inserted.
• Low voltage, power failure or part of the
circuit t
ripped.
• Insert the power cord plug firmly.
• Check the power supply at home.
Light not on
• The appliance is not powered on.
• The light is broken.
• Unplug and re-plug the power cord.
• Replace the light with a new one.
Fruits or vegetables
are frozen
• H
as the food been placed at the back of the
fridge? The area near the back wall is where
the temperatures are
coldest.
• Fruits or
vegetables
are
stored in the
Fresh/Chill zone.
• Not placing f
ood which may freeze easily at
the back of the fridge
compart
ment.
• The Fresh/Chill zone is only for meat/
fish.
Fridge/freezer is over-
cooling
• Temperature control is not set
correctly.
• Set the temperature higher.
Compressor working
for a long time
• High ambient temperature causing long
working time.
• Putting too much food in at one time.
• Food is put in before it has cooled down.
• Opening the door too often.
• The frost layer inside is too thick.
• This is normal.
• Do not put too much food in at one time.
• Wait until the food has cooled down
before putting it in.
• Do not open the door too of
ten.
• Need to defrost.
Door does not close
properly
• Door is stuck with objects.
• Too much food in.
• Door gasket
deformed.
• Do not put in too much food.
• Place the appliance stably.
• Heat the door gasket, then cool it for
restoration (with an electrical drier or hot
water for heating).
Outer wall is hot
• When the appliance is operating, heat is
dissipated to the outside through the metal
tubes inside the cabinet.
• Higher ambient t
emperatures in the
summer cause the temperature of the outer
wall to rise.
• Higher temperature on the outer wall is
normal.
• Increase the heat dissipation space, or put
the appliance in a ventilated and cool place.
Cross
or vertical
beams are hot
• There are metal tubes inside the beams, and
the heat released from the tubes prevents
condensation.
• This is normal.
Odors
• Spoiled food
• Food with strong odors
• The interior compartment is dirty.
• Clean and remove any spoiled food.
• Make sure strong smelling food is
wrapped airtight.
• Clean the
interior compartment.
Condensation forms
on the outside
• Condensation may form when the
humidity in the room is high.
• This is normal. Wipe off the
condensation using a dry cloth.
Condensation forms
inside the fridge
and
drawers
• T
he fridge maintains a high humidity to
keep
vegetables
and
other
food items
fresh.
• Humidity is too high in the room and
doors have been opened frequently.
• The door gasket are not tight.
• Wipe off the condensation using a dry cloth
.
• Do not open doors as frequently or do not
keep them open too long.
• Check the door gasket, clean or
correct
p
osition.
V.1
20
Bekijk gratis de handleiding van Teka RBF 43345 FI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | RBF 43345 FI |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10161 MB |
