Teka IBF 63210 SSM handleiding

Fornuis

Teka

21 pagina's

PDF beschikbaar

Handleiding

mm ne sétinU / mm ni stinU / mm me sedadinU / mm ne sedadinU

selaminim secnatsiD / secnatsid muminiM / saminím saicnâtsiD / saminím saicnatsiD

noitallatsnI / / noitallatsnI / oãçalatsnI / nóicalatsnI

L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm) F(mm)

560+4

50 min.5862520590 3 min.

A(mm) B(mm) C(mm) D E

Air exit 5mm Air intake20 min.50 min.760

Installation

1. Selection of installation equipment

Cut out the work surface according to the sizes shown in the drawing.

For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole.

Be sure the thickness of the work surface is at least 12mm. Please select heat-resistant and insulated work surface material (Wood and similar fibrous or hygroscopic

material shall not

be used as work surface material unless impregnated) to avoid the electrical shock and larger deformation ca used by the heat radiation from the

hotplate. As shown below:

WARNING: Ensuring Adequate Ventilation

Make sure the induction cooker hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid accident al touch with the overheating bottom of the

hob, or getting unexpec

table electric shock during working, it is necessary to put a wooden insert, fixed by screws, at a minim um distance of 50mm from the bottom of

the hob. Follow the requirements below.

Under any circumstances, make sure the Induction cooker hob is well ventilated and the air inlet and outlet are not blocked. En sure the induction cooker hob is in

good work state. As shown below

Note: The safety distance be

tween the hotplate and the cupboard above the hotplate should be at least 760 mm.

Note: The safety distance between the sides of the hob and the inner surfaces of the worktop should be at least 3mm.

490+4

wall

Min.12mm

760mm

Bekijk gratis de handleiding van Teka IBF 63210 SSM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.