Handleiding
Je bekijkt pagina 14 van 56
Elements of a burner
Whenever you reassemble a burner,
check that all the components are pro-
perly in place, as a part that is wrongly
positioned can lead to overheating and
damage the glass.
Igniting the burners
* Make sure that the knobs are in their
correct position.
* Turn on the gas at the mains or turn the
gas cylinder’s tap.
* Press down the burner control.
* Keeping the burner control pressed
down, turn it all the way till the gas igni-
tes. Keep it pressed down for between 2
and 5 seconds so that the safety ther-
mocouple can take effect.
* Set the control to the position required.
The ignition (ceramic and electrode)
should be cleaned regularly and care-
fully in order to avoid ignition problems.
Check, too, that the grooves in the bur-
ners have not become obstructed.
Use and Maintenance
fig. 7
Grid
Diffusing cover
Diffusing crown
Injector
Injector holder
fig. 8
‘Burner in operation’ indicator
Knob position when not in use
Maximum gas position
Minimum gas position
Off position
Star (On position)
GB_61401134_en.qxd 27.02.2015 14:52 Page 13
14
Bekijk gratis de handleiding van Teka HLX 50 4G AI CI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | HLX 50 4G AI CI |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7659 MB |
