Teka EWH 100 DHH handleiding
Handleiding
Je bekijkt pagina 41 van 50
(Fig.6)
1.
2.
3.
4.
The supply socket must be earthed reliably. The rated current of the socket
shall not be lower than 10A. The socket and plug shall be kept dry to
prevent electric leakage. Inspect frequently whether the plugs are well
plugged in the socket. Inspect method is as follows: insert the power
supply plug into the socket,after using for half an hour, shut down the unit
and pull the plug out, and inspect the plug in case it scalds your hand. If
tempeature is over 50℃, please plug in another socket. to avoid the plug
being damaged, fire or other personnel accidents result from badcontact.
For the places or the wall where the water
may splash, the installation
height of the socket shall not be lower than 1.8m.
The wall in which the electric water heater is installed shall be able to bear
the weight equalling twice the weight of the heater fully filled with water
without distortion or cracks. Otherwise, other strengthening measures
The one-way safety valve attached to the
machine must be installed to the
cold water inlet of this machine (see Fig.6).
Hot water
Cold water
Pressure relief valve
should be adopted.
6
Bekijk gratis de handleiding van Teka EWH 100 DHH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teka |
| Model | EWH 100 DHH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5631 MB |
