Tefal X-plorer Serie 60 RG7447 handleiding
Handleiding
Je bekijkt pagina 22 van 29

42 43
5.
IS THERE A PROBLEM WITH YOUR APPLIANCE?
According to model:
• The charger is getting hot:
4 This is perfectly normal. The vacuum cleaner can remain permanently connected to the charger
without any risk.
• The charger is connected but your appliance is not charging:
- The charger is incorrectly attached to the appliance or is faulty.
4 Check that the charger is properly connected or contact an Approved Services Centre to change
the charger.
• Your appliance stops during use:
- Your appliance may be overheating.
4 Stop the appliance and leave cool for at least 1 hour.
4 If it overheats on repeated occasions, contact the Approved Services Centre.
• The appliance stopped after the charge light was ashing:
- The appliance has run out of battery charge.
4 Recharge the vacuum cleaner.
• The power-brush is not working properly or makes a noise:
- The rotating brush or hose are obstructed.
4 Stop the vacuum cleaner and clean them.
- The brush is worn.
4 Contact an Approved Service Centre to change the brush.
- The belt is worn.
4 Contact an Approved Service Centre to change the belt.
• The power-brush stops during vacuuming:
- The safety function has been triggered.
4 Stop the vacuum cleaner. Check that nothing is obstructing the rotation of the brush; if there is an
obstruction, remove it and clean the power-brush, then turn on the vacuum cleaner.
• Your vacuum cleaner is not vacuuming as well, is making noise, whistling:
- The intake channel is partially blocked.
4 Unblock it
- The dust collector is full.
Empty it and clean it.
- The dust collector is not properly tted.
4 Re-position it correctly.
- The intake head is clogged.
4 Remove the power-brush and clean it.
- The protective foam lter is saturated.
4 Clean it.
EN
5.
RG74XX
Serial No. Error Error description
1 Left wheel error
Left wheel is not working, overload in left wheel.
Indicator POWER ashes twice and beeps once.
2 Right wheel error
Right wheel is not working, overload in left wheel.
Indicator POWER ashes 3 times and beeps once.
3 robot lifted error
The robot is lifted over 1 second.
Indicator POWER ashes 4 times and beeps once.
4 Front wheel error
Front wheel is not working, is stucked.
Indicator POWER ashes 5 times and beeps once.
5 Cli sensors error
Cli sensors are not working.
Indicator POWER ashes 6 times and beeps once.
6 Low battery error
POWER is going to be dead.
Indicator POWER ashes 7 times and beeps once.
7 Front bumper error
Switch on the left or right side of bumper is not restored.
Indicator POWER ashes 8 times and beeps once.
8 Middel brush error
Main brush is not working, overload.
Indicator DOCKING ashes 2 times and beeps once.
9 Side brush error
Side brush is not working, overload.
Indicator DOCKING ashes 3 times and beeps once.
10 Wall sensor error
Wall sensor error.
Indicator DOCKING ashes 4 times and beep once.
11 Fan motor error
Fan motor is not working, overload.
Indicator DOCKING ashes 5 times and beeps once.
12 No dustbin error
No dustbin.
Indicator DOCKING ashes 6 times and beeps once.
13 Charging error
Robot is not well connnected to the docking station.
Indicator DOCKING ashes 7 times and beeps once.
Please keep this user manual.
Bekijk gratis de handleiding van Tefal X-plorer Serie 60 RG7447, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Tefal |
Model | X-plorer Serie 60 RG7447 |
Categorie | Stofzuiger |
Taal | Nederlands |
Grootte | 4728 MB |
Caratteristiche Prodotto
Kleur van het product | Wit |
Ingebouwd display | Nee |
Breedte | 340 mm |
Diepte | 340 mm |
Hoogte | 60 mm |