Tefal InfinyMix+ BL91HD handleiding
Handleiding
Je bekijkt pagina 4 van 66
32
EN
With the on the go bottle (E) you can manage the blending speed from 1 to 7 by pressing
the setting +/- buttons (K). You can also set up the running time
by pressing the setting
+/- buttons (K) between 5 seconds and 90 seconds. Your blender will stop automatically at the
end of the program. If you want to stop the blender before the automatic end of the program,
press on the Start/Stop button (G).
When using the blender, do not use any accessories other than the pusher to avoid damaging
the bowl.
Less than 3 minutes of mixing are enough to blend liquids for most recipes.
To add ingredients while blending, remove the middle cap from the lid and add the ingredients
through the feeder hole. Beware of the risk of spatter.
WARNING: After running one cycle in the blender for the maximum processing time, let the
blender rest for 1 minute before operating it again. After using the blender for a maximum of
two cycles, stop the appliance and leave to cool to room temperature (takes about 2 hours).
The appliance is fitted with overload protection. This prevents the motor from being damaged
by abnormal usage.
If the appliance switches off during operation, proceed as follows:
Unplug and leave to cool down for around 15 to 20 minutes.
Reconnect the appliance to the power supply and resume blending.
After approx. 3 minutes without use, your appliance will start a standby mode. To switch on your
appliance again, press the Start/Stop button (G).
ROUGH CHOPPING SMALL QUANTITIES
Accessory used: assembled chopper
Chop in a few seconds by pulsing (L): peanuts, almonds etc.
Model 1600 w: quantity/max. time: 140 g peanuts/8 seconds or 150 g almonds/8 seconds
ASSEMBLING AND FITTING THE ON THE GO BOTTLE
Moisten the seal (E3) (even if already fitted on the blades unit (E4)). Be careful to correctly fit
the seal back onto the blades unit (E4) the correct way up (Fig 9).
Add the ingredients into the bottle without exceeding the maximum level indicated:
* 400ml for thick mixtures
* 600ml for liquids
Warning: Do not pour boiling liquids (over 80°C/176°F) into the bottle.
Place the blades unit (E3+E4) on the locking ring (E5) (Fig. 10). Turn the jar (E2) upside down
and assemble the locking ring with the blades on the base of the jar (Fig. 11) by locking it in
the clockwise direction.
Turn the bottle upside down and position it correctly on the motor unit. Lock it by rotating it
in the clockwise direction (Fig. 12). A bottle
logo will appear on the screen (I) and a beep
signal will sound.
USING YOUR APPLIANCE
Put the appliance on a flat, stable, heat-resistant surface away from heat sources or water.
Plug your appliance in and select your program (J) or manual settings
(K)
(time and speed) and
press the Start/Stop button (G).
With the jar (A) you can change the blending speed from 1 to 9 by pressing speed program
then the setting +/- ("H" being the maximum speed), and you can also set up the running time
by pressing time program then setting +/- (K) between 5 seconds and 3 minutes.
Add the ingredients into the assembled jar without exceeding the maximum level indicated
(Figures 4 and 5):
* 1.75 L for thick mixtures
* 1.5 L for liquid preparations
Warning: Do not pour boiling liquids (over 80°C/176°F) into the jar.
Lock the lid on the jar and lock in the clockwise direction (Fig. 6). Make sure the lid is locked
correctly: the point on the lid should be aligned with point on the handle (Fig. 7). Lock the
middle cap in position on the lid and lock it by rotating it in the clockwise direction. If the lid
is not correctly locked, your appliance will not start; Position the jar correctly on the motor unit
(Fig. 8): the point on the jar should aligned with the lock on the motor unit (Fig. 8). A jar logo
will appear on the screen (H) and a beep signal will sound.
Bekijk gratis de handleiding van Tefal InfinyMix+ BL91HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tefal |
| Model | InfinyMix+ BL91HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10195 MB |
