Tefal Express Auto Control GV7751 handleiding

Niet gecategoriseerd

Tefal

33 pagina's

PDF beschikbaar

Handleiding

• The MIN(DELICATES)/ NORMAL/ MAX(JEANS) buttons control the temperature and steam combinations that are

suitable for different types of fabrics. They may be selected at any time.

• When the light of the selected button MIN(DELICATES)/ NORMAL/ MAX(JEANS) remains lit up (after around 2

minutes) the steam generator is ready for use - ﬁg.12.

Operating the control panel

• The light of the selected button MIN(DELICATES)/ NORMAL / MAX(JEANS) ﬂashes while the appliance is warming up.

• The red «Water tank empty» light is ﬂashing - ﬁg.4: the water tank is empty. Fill the water tank and press the «OK»

button for the light to switch off. See paragraph «Filling the water tank during use»

• The orange «Anti-Calc» light is ﬂashing - ﬁg.13: maintenance is required, see paragraph «Maintenance and cleaning».

• Your steam generator comes with an automatic shut-off system after approximately 8 minutes without use. Only the

red «ON-OFF» button is ﬂashing: the steam generator is on stand-by. Press the «ON-OFF» button - ﬁg.8 or the steam

shot button to start ironing again. See paragraph «AUTO-OFF» System.

• To switch off your steam generator: press and hold the «ON-OFF» button for a few seconds until the light goes

out - ﬁg.8.

Use

Steam ironing

• To obtain steam, press the steam control button under the iron handle - ﬁg.14. The

steam will stop when you release the button.

• After approximately one minute, regularly while it is being used, your steam

generator’s electric pump injects water into the boiler. It makes a noise but this is

quite normal.

• If you are using starch, always spray it onto the reverse side of the fabric to be ironed.

• Be careful of hot steam when ironing close to the edges of the board.

Smart Technology Auto Control

Your steam generator is ﬁtted with SMART TECHNOLOGY AUTO CONTROL electronic

regulation which gives you a choice of three optimum temperature and steam combinations.

Settings Recommended use Labelling Examples

MIN

(Delicates)

Very gentle, for the most

delicate items and sensi-

tive colours

Acetate, elastane, polyamide, acrylic and synthetic

mixes

Note: do not use steam to iron acrylic or

modacrylic fabrics.

NORMAL Best for all standard fabrics

Cotton, wool, silk, polyester, cashmere, mohair,

viscose, and synthetic/cotton mixes

MAX

(Jeans)

The most effective for

thick or difﬁcult to iron

fabrics

Linen, thick cotton, jeans (dark colours)

Warning, fabrics with the symbol are not suitable for ironing.

Start with the fabrics to be ironed at a low temperature and ﬁnish with those that need higher

temperature.

When you select a higher temperature, you can continue to iron, provided that you are not

ironing a more delicate fabric that requires a lower temperature.

If you are in doubt about the type of fabric an item of clothing is made from, check the label.

If you are ironing woollen garments, press repeatedly on the steam shot button - ﬁg.14

without placing the iron on the garment. This will avoid it becoming shiny.

The «ECO» function allows you to reduce energy consumption for the selected

mode. To change to «ECO» mode, select MIN(DELICATE)/ NORMAL / MAX(JEANS)

mode and then press the «ECO» button. To exit «ECO» mode, press the «ECO»

button again.

Do not iron over zips, studs or

other hard or sharp objects

which may damage the

soleplate. Do not place the

iron on a metal support. When

taking a break from ironing,

always place the iron on the

iron rest plate of the unit. It is

equipped with non-slip pads

and has been designed to

withstand high temperatures.

During ﬁrst use or if

you have not used the

steam function for a few

minutes, press the steam

control button several

times in a row

- ﬁg.14 holding the iron

away from your laundry.

This will remove the cold

water from the steam

circuit.

Bekijk gratis de handleiding van Tefal Express Auto Control GV7751, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.