Handleiding
Je bekijkt pagina 8 van 151
1514
en
• The timer is available in Boil Mode:
Default time Maximum time
10 min 15 min
BOOST Mode
• Boost raises the ring temperature very quickly. It can be used for
cooking food, such as meat, very quickly at a high temperature.
• Below are the power levels that correspond to each program:
P1 P2 P3 P4 P5 P6 P7
300 W 600 W 1200 W 1400 W 1600 W 1800 W 2100 W
• The timer is available in Boost Mode:
Default time Maximum time
15 min 120 min
STIR FRY Mode
• Stir Fry Mode cooks food in a little fat at a high temperature so as
to brown the surface.
• Below are the power levels and oil temperatures that correspond
to each program:
P1 P2 P3 P4 P5 P6 P7
600 W 1200 W 1200 W 1400 W 1400 W 1800 W 2100 W
110 °C 125 °C 140 °C 155 °C 170 °C 185 °C 200 °C
• The timer is available in Stir Fry Mode:
Default time Maximum time
15 min 180 min
FRY Mode
• This mode fries food in a large quantity of oil - maximum 2 L.
• Below are the power levels and oil temperatures that correspond
to each program:
P1 P2 P3 P4 P5 P6 P7
1200 W 1200 W 1400 W 1400 W 1600 W 1800 W 2100 W
100 °C 120 °C 140 °C 160 °C 180 °C 200 °C 220 °C
• The timer is available in Fry Mode:
Default time Maximum time
15 min 180 min
CLEANING
ERROR CODES
You must disconnect the power lead, wait until the ceramic glass
plate has cooled, then follow the instructions below to clean the
appliance:
1. Ceramic glass plate: if the ceramic glass plate is very dirty, clean
using a damp non-abrasive sponge or for more stubborn stains
use an appropriate cleaning product which is designed for use on
ceramic hobs.
2. Cooker body and control panel: Use a damp soft cloth to clean.
In case of any oil stains that are not easily removed, wipe away the
stains with a soft cloth rinsed in warm water and a little washing-up
liquid and then clean using a damp soft cloth.
3. Air entry/air exit surface: remove any dust with a cotton bud.
• Receptacle missing or not the correct type:
If the pot base diameter is less than 10 cm or if the pot material is
unsuitable, the buzzer will sound and the digital display shows “E1”.
Change the cookware.
• Protection of the power source against overheating:
If the power source overheats, the induction cooking appliance cuts
off the incoming power supply and the screen displays “E2”. Allow the
hotplate to cool: if the defect persists, please contact the customer
service.
Bekijk gratis de handleiding van Tefal Everyday IH2108, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tefal |
| Model | Everyday IH2108 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10774 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Aanrecht |
| Soort bediening | Touch |
| Kleur van het product | Zwart |
| Aantal vermogenniveau's | 7 |
| Ingebouwd display | Nee |