Teesa TSA8051 handleiding
Handleiding
Je bekijkt pagina 9 van 21
16
Owner’s manual
17
EN
Owner’s manual
EN
CLEANING
heating element. If the set temperature is higher than the ambient temperature by 1 –
2°C, the device will work with low heating power. If the set temperature is at least 3°C
higher than the ambient temperature, the device will work with high heating power.
6. The device has a built-in timer that will activate the standby mode after the time set by the
user (1-8 hours). To set the timer, press the timer button until the desired time period is
displayed
7. Press the rotation button to turn on automatic rotation. Press it again to stop rotation.
8. To turn on the visual imitation of the replace located at the bottom of the front of the
device, press the imitation of replace button. Press it again to turn o.
9. If the device tilts or is raised during operation, the protection will automatically turn o
the device.
Note:
• For optimum benet, close windows and doors
• Do not cover the ventilation holes as this will cause overheating and will activate the cut out
• Before switching o, let the device work for 5-10 seconds in fan mode.
Clean your device regularly.
1. Before cleaning unplug the device from power mains socket.
2. Allow the device to cool completely.
3. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean
the fan.
4. Ensure the intake grill is free from dust, as this will reduce the airow. Accumulated dust
can be removed with soft cloth or vacuum cleaner
5. Allow surface to fully dry before using the device again.
SPECIFICATION
BASIC FEATURES
Touchpad
Overheat protection
Automatic switch o in case of overturning
LED display
Ceramic heating element PTC
Automatic rotation 90°
Remote control
Decorative imitation of a bonre
3 work modes (cool air / warm air / hot air)
Range of set temperature 18 – 45°C
TECHNICAL DATA
Sound power level: 50 dB
Power cable lenght: 150 cm
Remote control power supply: 3V CR2025 battery
2 heating levels: 1000 W / 2000 W
Rated power: 2000 W
Power input: AC 220 - 240 V; 50 - 60 Hz
PHYSICAL PARAMETERS
Dimensions: 850x140x140 mm (without base)
Base diameter: 300 mm
Weight: 3,3 kg
IN SET
Remote control, user’s manual
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on
the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working
life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local government oce, for details of
where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes
for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
Bekijk gratis de handleiding van Teesa TSA8051, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teesa |
| Model | TSA8051 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2075 MB |
