Teesa Hypercare T500 TSA0569 handleiding
Handleiding
Je bekijkt pagina 9 van 23
EN
Owner’s manual Owner’s manual16 17
EN
CHARGING
Notes:
• Make sure the appliance is turned o before connecting it to the power supply.
• It takes about 8 hours to fully charge the device what provides about 45 minutes of
shaving time.
• It is recommended to charge the appliance once a week.
1. Connect one end of the AC adapter to the power supply socket, connect the other end
to the appliance’s power socket.
2. When the appliance is charging, charging indicator is on.
3. When charging has nished, charging indicator is on. Disconnect the AC adapter
from power supply socket and the appliance.
OPERATION
Shaving:
1. Press the power button to turn on the appliance.
2. Move the shaving head against the direction of beard growth
using both circular and straight movements.
3. Gently press shaver to the skin, so the oating blades can easily
follow the contours of your face.
4. After shaving turn o the appliance by pressing the power button.
5. Clean the shaver according to the instructions included in “Cleaning” section.
6. Put the protective cap on the shaving head to protect the blades from any damage.
Trimming
1. Push the trimmer release slide downwards to open the trimmer.
2. Turn on the appliance.
3. Start trimming.
4. After trimming, turn o the appliance by pressing the power button.
5. Clean the trimmer according to the instructions included in “Cleaning” section.
6. Push the trimmer downwards until it locks in place to close it.
CLEANING
General:
• Do not immerse the appliance in water.
• Do not use any abrasives or chemical agents to clean this product.
• Clean only the casing with a soft and slightly damp cloth.
• The appliance may be rinsed under runnning water.
• Clean the appliance after each use. Regular cleaning guarantees better shaving
performance.
Cleaning with cleaning brush:
Cleaning shaving head:
1. Make sure the appliance is turned o and disconnected from power supply.
2. Clean the outside of the shaving head by brushing out dirt.
3. Press shaving head release button to open shaving head.
4. Clean the inside of the shaving head and hair chamber.
5. After cleaning close the shaving head by pushing it downwards until it locks in place.
Cleaning trimmer:
1. Make sure the appliance is turned o and disconnected from power supply.
2. Push the trimmer release slide downwards to open the trimmer.
3. Brush up and down along the trimmer teeth.
4. After cleaning, push the trimmer downwards until it locks in place to close it.
Thorough cleaning:
Note: Clean the shaving blades thoroughly once a month to provide optimal performance.
1. Make sure the appliance is turned o and disconnected from power
supply.
2. Press the shaving head release button to open the shaving head.
3. Pull the shaving head o the appliance.
4. Turn the retaining frame lock counterclockwise and remove the
retaining frame.
5. Remove and clean the shaving blade and its guard one by one.
Note: Do not clean more than one blade and guard at a time, since
they are all matching sets. Shaving performance may deteriorate if
blade will be placed in the wrong guard.
Bekijk gratis de handleiding van Teesa Hypercare T500 TSA0569, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Teesa |
| Model | Hypercare T500 TSA0569 |
| Categorie | Scheerapparat |
| Taal | Nederlands |
| Grootte | 3378 MB |
