Teesa Cool Touch P800 TSA8044 handleiding

Niet gecategoriseerd

Teesa

27 pagina's

PDF beschikbaar

Handleiding

Owner’s manual Owner’s manual18 19

COOLING FUNCTION

This device can be used as a classic fan or as an air cooler. When cooling function is on, water

pump will take the water from the water tank and pour it onto the paper lter. Paper lter

absorbs the temperature of the water and the evaporated air is blown out with the help of

fan.

Prior to use, make sure the lters are properly mounted, then ll the water tank with water

and press the COOLER button.

Filling water tank

It is necessary to ll the water tank with water if you want to use cooler function. If

water level is below the MIN marking or there is no water in the water tank it is

forbidden to turn on the cooler function. Activating cooler function with insucient

amount of water may cause malfunction of the water pump.

1. Turn the water tank lock to horizontal position and slide out the water tank.

2. Pour only clean water to the water tank. When lling the water tank please keep

observing water level indicator on the water tank. Make sure to pass MIN marking but do

not ll in more than MAX marking.

3. When water tank is lled with proper amount of water, slide the water tank back in and

close the lock.

Important:

• When water tank is lled with water, make sure not to lean it or bump into it as to avoid

leaks and damaging the device.

• Check water level in the water tank regularly when cooling function is on. If the water

level is low and drops down to MIN marking, pour more water. Always make sure there is

enough water inside the water tank.

• It is recommended to replace water at least once a week.

• Water tank must be lled only with clean water.

Ice boxes

In order to increase cooling eect, use ice boxes which are supplied with the unit.

1. Prior to use, ll the ice boxes with water, screw the cap back on and shake the ice box.

Then place the ice boxes in the freezing compartment of your refrigerator for a few hours.

When they have frozen successfully, take them out of the refrigerator.

2. Slide out the water tank and put ice boxes inside.

3. Pour water into the water tank up to the MAX marking.

• Be sure to rst put the ice boxes inside the water tank, and then ll in water.

OPERATION

Find proper location for the device: at and stable surface, with enough space around to

allow free circulation.

Connect the device to power mains. Device issues a beep and power indicator lights up.

Device enters standby mode.

1. COOLER button: Press this button to turn on cooling function (LED indicator lights up).

Press this button again to turn o this function (LED goes o).

2. SWING button: Press this button to turn on oscillation function (LED indicator lights up).

Press again to turn o this function (LED goes o).

3. TIMER button: Press this button to set the device to turn o automatically after preset

time within the range from 0,5 to 7,5 hours. Timer increases by 0,5 hour with each press

of the button. Corresponding indicator will light up next to the selected setting.When set

time is up, the device will turn o automatically.

4. MODE button: Press this button to switch between 3 available operation modes: normal,

nature and sleep. Corresponding indicator will light up next to the selected setting.

5. SPEED button: Press this button to switch between 3 available fan speed settings: low,

medium and high. Corresponding indicator will light up next to the selected setting.

6. ON/OFF button: Press this button to turn on/o the device.

CONTROL PANEL

1 2 3 4 5 6

Bekijk gratis de handleiding van Teesa Cool Touch P800 TSA8044, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.