Technisat Pureno Trim 100 handleiding
Handleiding
Je bekijkt pagina 37 van 124
37
DE
EN
FR
IT
NL
PL
Switch the device o aer each area has been cleaned. This will significantly
increase the operating time per baery charge. Recharge the baery aer
use.
> Select the accessories as required and aach them to the device.
> Switch the device on by pressing the operating switch (8) once. The device
immediately starts the suction process. The touch display (1) lights up.
> If necessary, the suction strength can be changed manually via the touch
display by touching the “Suction strength” field. The intelligent suction control
can also be set by touching the AUTO symbol.
> Move the device over the area to be cleaned.
> If you want to switch the device o again, press the control switch once
more.
8.1 Emptying the dust holder
Remove the dust holder from the motor unit to facilitate emptying.
> Hold the dust holder over an open bin. The distance to the bin should be as
small as possible so that the dust is not dispersed into the surroundings.
> Press the emptying buon (5) on the dust holder. The lid of the dust holder
opens and the dirt falls out.
> Press the lid onto the dust holder to close it. The tab must engage audibly.
Bekijk gratis de handleiding van Technisat Pureno Trim 100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Technisat |
| Model | Pureno Trim 100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10661 MB |
