Handleiding
Je bekijkt pagina 24 van 64
24
Positioning the Oven Trays and Shelves
• The grill tray or oven shelf can be located in any of the five height positionsin the oven.
Refer to the cooking guide table for the recommended shelf position. When fitting the trays or
shelves, ensure they are fitted between the two wires that are closest together as shown below.
• Oven Shelves have a stop so that they are not fully withdrawn by accident.
To fully remove the oven shelves, lift the front of the shelf slightly andwithdraw fully from the oven.
Note: That the baking tray does not have a stop position and can be fully
withdrawn without interruption, so be careful not to accidentally fully withdraw the tray.
• Fit trays and shelves between bars as shown below.
• To remove the oven side racks, push the wire support backwards towards the rear
of the oven cavity to release from the locking pin. Once released, the side racks can
be removed by gently pulling out of the positioning holes in the oven walls, towards
the centre of the oven. To replace the side racks, repeat steps in reverse procedure.
OPERATION
Bekijk gratis de handleiding van Technika TFS9010AINDMB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Technika |
| Model | TFS9010AINDMB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4559 MB |