Handleiding
Je bekijkt pagina 18 van 64
18
INSTALLATION
Connection of the Cable to the Mains
Connect the feeding cable to a plug suitable for the load indicated on the rating plate of the product.
In case of a direct connection to the mains (cable without plug), it is necessary to insert a suitable omnipolar
switch before the appliance, with minimum opening between contacts of 3mm (the grounding wire should
not be interrupted by the switch). Before connecting to the mains, make sure that:
• The electrical counter, the safety valve, the feeding line and the socket
are adequate to withstand the maximum load required (see rating plate).
• The supply system is regularly grounded, according to the regulations
in force. The socket or the omnipolar switch can easily be reached
after the installation of the oven.
• After carrying out the connection to the mains, check that the supplying
cable does not come into contact with parts subject to heating.
• Never use reductions, shunts, adaptors which can cause overheating or burning.
The manufacturer is not liable for any direct or indirect damage caused by faulty installation
or connection. It is therefore necessary that all installation and connection operations are
carried out by qualified personnel complying with the local and general regulations in force.
Electrical features Watt
Oven light 25
Upper heating element 1600
Bottom heating element 1300
Grill heating element 2600
Circular heating element 2000
Ventilator motor 18
Cooling fan 18
Bekijk gratis de handleiding van Technika TFS9010AINDMB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Technika |
| Model | TFS9010AINDMB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4559 MB |