Handleiding
Je bekijkt pagina 8 van 19
5
Step 1 Set up your TV
Remove your TV from the box
To use the stand
Be careful, it’s heavy!
Align the stands with the screw holes located on the TV. Secure the stands to the TV with
the remaining stand screws. The stands can be installed at a higher or lower position as
illustrated.
Remove the back cover from the vertical stand component as illustrated, then align the
vertical stand with the stand plate and secure with the screws from the accessory bag.
A
B
Insert the cable clips as illustrated.
C
Reinstall the back cover to the vertical stand component by aligning the four guide pins
with the corresponding holes.
E
Route the cables as illustrated.
D
Stand installation is completed.
F
Note: Make sure the installation direction of the stand is the same as illustrated. Please
remove the protective film after installation.
Ready for the step-by-step? You’re only minutes away from TV bliss!
and pets. Do not use packaging bags in cribs, beds, carriages, or playpens.
A
B
65”/75” Screws:
M5x16mm
or
85” Screws: M5x20mm
or
Screws:
M4x8mm
Bekijk gratis de handleiding van TCL 65QM8K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TCL |
| Model | 65QM8K |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2208 MB |
