Handleiding
Je bekijkt pagina 13 van 17
EN
13
English
Using more of your TV
1.
Press
on the remote control, select
Network >
Internet connection
and press
OK/►
to enter.
2.
Press
▲/▼
to select
On
and press
OK/►
to
conrm.
3.
Press
▲/▼
to select
Interface
and press
OK/►
to
enter.
4.
Press
▲/▼
to select
Wireless
and press
OK/►
to
conrm.
5.
Press
▲/▼
to select
Wireless settings
and press
OK/►
to enter. You can set the wireless network
connection in 3 ways:
-
a) Scan
• Press
▲/▼
to select
Scan
and press
OK/►
to enter. The TV will search all access points
within range. Access points found by the TV will
be displayed.
• Press
▲/▼
to select an available access point,
then press
OK/►
to connect.
• Press
to return to the
Wireless settings
menu.
Note: If you select a protected access point,
you will have to enter the corresponding
password. Press OK on the remote control
to display the virtual keyboard to enable you
to enter the password.
-
b) Manual
Press
▲/▼
to select
Manual
and press
OK/►
to
enter. You will be prompted to enter the correct
SSID of an available wireless router, select its
security type and enter the password (if needed)
to set up the connection.
-
c) Auto
If your AP (Access Point) supports WPS (Wi-
Fi Protected Setup), you can connect to the
network via PIN (Personal Identication Number)
or PBC (Push Button Conguration). WPS will
automatically congure the SSID and WPA key
in either mode. Press
▲/▼
to select
Auto
and
press
OK/►
to enter.
•
PIN
: Select
PIN
and press
OK/►
to enter.
Choose a random PIN code. Make sure
this code is installed on the AP. (For the
procedures, refer to your router manual.) Select
OK
and press
OK
to set up the connection.
•
PBC
: If your router has a PBC push button,
select
PBC
and press
OK/►
to enter. Press
the PBC push button on your router within 2
minutes before you select
OK
and press
OK
again. Your TV will automatically acquire all the
network setting values it needs and connect to
your network.
6.
Press to return to the
Network
menu.
7.
If you want to check the Internet connectivity, press
▲/▼
to select
Connection test
and press
OK/►
.
Connecting to a wired network
You can connect your TV to your LAN using cable in
three ways:
• You can connect your TV to your LAN by connecting
the LAN port on your TV to an external modem
using a Cat 5 cable.
• You can connect your TV to your LAN by connecting
the LAN port on your TV to an IP sharer, which is
connected to an external modem. Use Cat 5 cable
for the connection.
• Depending on how your network is congured, you
may be able to connect your TV to your LAN by
connecting the LAN port on your TV directly to a
network wall outlet using a Cat 5 cable. Note that
the wall outlet is connected to a modem or router
elsewhere in your house.
1.
Press
on the remote control, select
Network >
Internet connection
and press
OK/►
to enter.
2.
Press
▲/▼
to select
On
and press
OK/►
to
conrm.
3.
Press
▲/▼
to select
Interface
and press
OK/►
to
enter.
4.
Press
▲/▼
to select
Ethernet
and press
OK/►
to
conrm.
5.
Press ▲/▼ to select
IP settings
and press
OK/
►
to enter. You can set
Address type
to
Auto
or
Manual
.
- Select
Auto
if you want the TV to acquire and
enter the needed IP address automatically.
- Select
Manual
if you want to enter your IP
address manually, then:
• Press ▼ to go to the rst entry eld.
• Enter the
IP Address
,
Subnet Mask
,
Default
Gateway
,
Primary DNS
and
Secondary
DNS
values. Use the numeric buttons to enter
numbers and the ▲/▼/◄/► buttons to move
from one entry eld to another.
- Once
IP setting
is completed, press ▲/▼/◄/►
to select
OK
and press
OK
to conrm. The set
will try to connect to the network and inform
you about the result. Press to return to the
Network
menu.
6.
If you want to check the information about current
connection, press ▲/▼ to select
Information
and
press
OK/
► to enter. Press to return to the
Network
menu.
7.
If you want to check the Internet connectivity, press
▲/▼
to select
Connecting test
and press
OK/►
.
Common interface
Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
Bekijk gratis de handleiding van TCL 40EZ500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TCL |
| Model | 40EZ500 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 2409 MB |
