Taurus Homeland Laser handleiding
Handleiding
Je bekijkt pagina 6 van 80
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
WIFI CONNECTION & DOWNLOADING THE
APP
- To be able to use the Homeland Laser robot
from anywhere, the Taurus Homeland App has
to be downloaded.
the geographical location and select the room
where you are going to place the smart device.
- Add Homeland Laser by following the steps
described in THE QUICK GUIDE.
LUMINOUS WI-FI INDICATOR:
- To connect the Robot to the Wi-Fi:
- Press the button power interrutor (R).
- Press the Operation button (D) until the
button light ashes.
IMPORTANT:
- The device only supports a 2.4G Wi-Fi net-
work.
- If the connection fails again, then check the
following:
The robot is too far away from the router.
The Wi-Fi password is incorrect.
The Wi-Fi network is not 2.4GHz
CHARGING BASE POSITION:
- Connect the charger to the charging base.
- Place the load base at and next to the wall.
- To receive a good signal, you must leave a
radius of 1m to the right and left and 2 meters
forward of the base.
- Connect to the power.
INSTALL SIDE BRUSHES:
- Mount the side brushes on the bottom of the
robot by pressing the brushes into its slot.
SETUP:
- Download the Taurus Homeland App from the
App Store or Google Play.
- Sign up using your email address and a pas-
sword.
- Conrm registration using the verication code
that will be sent to your email account.
- Create your home, name your home, establish
Bekijk gratis de handleiding van Taurus Homeland Laser, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Taurus |
| Model | Homeland Laser |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 11255 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Stainless steel |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 320 mm |
| Diepte | 320 mm |
