Taurus Homeland Laser handleiding
Handleiding
Je bekijkt pagina 10 van 80
- Press / button to change the date. After
setting, press the (AL) button to conrm and
enter the time setting.
- The hour will begin to ash, press / button
to adjust time, and press / to switch bet-
ween hours and minutes. With each press, the
time increases or decreases 1.
- Press the (AL) button in progress or stop the
robot will beep when the time setting is com-
pleted.
3) CANCEL THE SETTINGS OF THE
CLEANING HOURS
- Press the (AM) button on the remote control
for 4 seconds, the vacuum cleaner will emit a
beep when the cleaning schedule conrmation
is canceled.
4 sec.
LED INDICATOR
LED LIGHT ROBOT STATUS
Flashing green Charging
Flashing yellow/
Solid yellow/Solid
Green
Standby / Cleaning / Fully
charged
Off Robot is off. To conserve
power, the light automati-
cally turns off when robot
is not docked to the char-
ging doc and has been
inactive for 1 minute.
Red/Yellow light
ash, or Red&Grenn/
Red& Yellow light
ash, Solid Red
+ding dong
Robot has an error. Refer
to the troubleshooting
section ”Anomalies” in this
manual for solutions
MAINTENANCE
- Disconnect the battery charger from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washingup liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- Never submerge the connector in water or any
other liquid or place it under running water.
HOMELAND
LASER
CLEANING
REPLACEMENT
FREQUENCY
Dust Bin
After each
use
-
Filters
Once every
week
Every 2 months
Rolling Brush
Once every
week
Every 6-12
months
Side Brushes
Once every
month
Every 3-6
months(or when
visibly worn)
Bekijk gratis de handleiding van Taurus Homeland Laser, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Taurus |
| Model | Homeland Laser |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 11255 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Stainless steel |
| Ingebouwd display | Ja |
| Gewicht | 2100 g |
| Breedte | 320 mm |
| Diepte | 320 mm |
