Taurus GC4HN handleiding
Handleiding
Je bekijkt pagina 23 van 72
Make sure that the ame does not go out by quickly turning from maximum ow to minimum ow. If it does then remove the
control knob and make further adjustments to the gas ow, testing it again once the adjustment has been made.
4. Repeat this process for each one of the gas taps.
Do not dismantle the tap shaft: in the event of malfunction, change the whole tap
After installation the licensed professional shall check the functioning of each burner. Ensure the hob is properly installed
and the gas connection is secure. Never attempt this if you smell gas. Turn off the gas supply immediately and open
windows to ventilate. Turn on the gas supply valve for your hob. Press and turn the knobs to open the burners and check
the ame. Observe the ame. A properly functioning burner will have crisp blue ames emanating from the burner holes.
The ames should be stable and evenly distributed around the burner head. If this is not the case turn off the gas valve
immediately and refer to the Troubleshooting section of the manual.
REPLACE THE NOZZLE
This operation must only be carried out by quali ed professionals and never by the user. Take off the burner cap and the
aluminum cap, then use suitable instrument for replacing the nozzle, (as show on the picture)
Installed originally there is either an LPG or NG nozzle as shown in the below table.
Originally installed Gas category
LPG injector Dia(mm)
G30
NG injector Dia(mm)
G20
GC2HB G30
Triple ring wok burner 0.91 yes 1.22
Semi- rapid burner 0.67 yes 0.94
GI2EB G30
Triple ring wok burner 0.91 yes 1.22
Semi- rapid burner 0.67 yes 0.94
Bekijk gratis de handleiding van Taurus GC4HN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Taurus |
| Model | GC4HN |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7339 MB |
