Taurus Crossback 29.6 Lithium handleiding

Niet gecategoriseerd

Taurus

44 pagina's

PDF beschikbaar

Handleiding

ted to the charger.

INSTRUCTIONS FOR USE

USE:

- Turn the appliance on, by using the on/o󰀨

switch. (B)

- The ON indicator lamp will light up. (C )

- Select the desired power.

- Slide one position for ECO speed / slide two

position for TURBO speed.

- To use the hand vacuum:

- Press the hand vacuum extraction button (H) on

the brush vacuum’s main body (E). (Fig. 2)

- Turn the appliance on, by using the on/o󰀨

switch. (I)

INSERTING THE MOP

(*) Only on the Inedit 29.6 Wash model

- Fill the mop’s water tank with water and, if ne-

cessary, add a few drops of detergent.

- Attach the water tank to the back the vacuum

cleaner’s brush base so that it clicks into posi-

tion and press the button to open the passage

for the water (Fig.3b)

- The mop can also be used dry.

- NOTE: The mop is machine washable.

FITTING AN ACCESSORY TO THE HAND

VACUUM:

- Press the hand vacuum extraction button (H) on

the brush vacuum’s main body (E). (Fig. 2)

- The hand vacuum is designed in such a way

that it allows the following accessories to be

tted: (use the combination that best meets your

requirements). (Fig.3)

- Furniture brush: Equipped with a brush at the

end, which brushes the surface as it is used.

- Crevice nozzle: Specially designed for getting

into cracks and di󰀩cult corners.

PARKING POSITION:

- This appliance has one parking position for

comfortable and straightforward storage.

FOLDING HANDLE:

- This appliance has a folded handle position for

easy storage. (Fig.4)

CLEANING

- Disconnect the charger from the mains and let it

cool before undertaking any cleaning task.

- Clean the appliance using a damp cloth with a

few drops of detergent and then dry it.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

for cleaning the appliance.

- Do not submerge the appliance in water or any

other liquid, or place it under a running tap.

EMPTYING THE DUST BOX:

- Empty the vacuum deposit when dust is visible

though the transparent walls, when it is full, or

when the vacuum cleaner does not work to its

full potential.

- Press the hand vacuum extraction button (H) on

the brush vacuum’s main body (E). (Fig. 2)

- Disconnect the dust box from the appliance.

(Fig. 5)

- Remove the cloth lter and its protector. (Fig. 6)

- Empty the contents into a suitable rubbish

container.

- Clean the dust box lter.

- Attach the dust box to the appliance.

- To reassemble, follow the above instructions but

in reverse.

CHANGING THE FILTERS:

TO REMOVE FILTERS:

- Press the hand vacuum extraction button (H) on

the brush vacuum’s main body (E). (Fig. 2)

- Disconnect the dust box from the appliance.

(Fig 5)

- Remove the cloth lter and its protector. (Fig. 6)

- To reassemble the lter, proceed with the above

instructions, in reverse order.

- Cleaning the rotary brush:

TO REMOVE THE BRUSH:

- Turn the rotating button on the bottom of the

tting to the left in order to release the brush.

(Fig. 7)

- Remove the brush and clean.

- To reassemble, follow the above instructions but

in reverse.

SUPPLIES

- Supplies can be acquired from distributors and

authorised establishments (such as lters, etc. )

for your appliance model.

- Always use original supplies, designed speci-

cally for your appliance model.

HOW TO REMOVE THE BATTERIES FROM

THE INTERIOR OF THE DEVICE:

- Caution: It is important that the batteries are

fully discharged prior to its withdrawal from the

Bekijk gratis de handleiding van Taurus Crossback 29.6 Lithium, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.