Tascam FR-AV4 handleiding
Handleiding
Je bekijkt pagina 76 van 153
76 TASCAM FR-AV4 V1.00
5. I/O SETTINGS
Setting the low-cut lter
Set this using LOW CUT.
This cuts audio below the selected frequency.
The low-cut lter can reduce bothersome noise,
such as from wind, air-conditioners and projectors.
Set the cuto frequency of the low-cut lter to
match the noise.
Options: OFF (default), 40 Hz, 80 Hz, 120 Hz, 220 Hz
NOTE
This cannot be used when the sampling frequency
is set to 192 kHz.
Setting the limiter
Set this using LIMITER.
Using the limiter can suppress distortion caused by
sudden excessive sound input.
O (default)
The limiter function is disabled.
On
This function prevents distortion when signals
that are too loud are input suddenly.
This is suited for recording live performances and
other situations with large volume changes.
CAUTION
Distortion could occur when the input sound is
excessively loud even if the limiter function is on.
In such cases, lower the input level or increase
the distance between the unit and the sound
source.
NOTE
This cannot be used when the sampling frequency
is set to 192 kHz.
Setting the equalizer
Set this using EQ.
The equalizer has the eect of amplifying and
attenuating specic frequency ranges. This can
be used, for example, to enhance the sound of
individual instruments, to adjust the balance of a
wide frequency range and to cut specic unwanted
frequencies.
OFF (default)
This disables the equalizer.
ON
With this setting, four bands can be adjusted
manually. In addition to low-frequency and
high-frequency boosts, two peak curves can be set.
Gain knobs (HIGH, H-MID (high mid), L-MID
(low mid), LOW)
These set the amounts levels are increased or
decreased for each band.
Ranges
GAIN: −12 dB – +12 dB (0 dB default)
FREQ knobs (HIGH, H-MID (high mid), L-MID
(low mid), LOW)
These set the cuto frequencies of the HIGH
and LOW bands and the middle frequencies of
the H-MID and L-MID bands.
Ranges
HIGH: 1.7 kHz – 18.0 kHz (5.5 kHz default)
H-MID: 32 Hz – 18.0 kHz (1.7 kHz default)
L-MID: 32 Hz – 18.0 kHz (1.7 kHz default)
LOW: 32 Hz – 1.6 kHz (400 Hz default)
Bekijk gratis de handleiding van Tascam FR-AV4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19761 MB |
