Tascam FR-AV4 handleiding
Handleiding
Je bekijkt pagina 75 van 153
TASCAM FR-AV4 V1.00 75
5. I/O SETTINGS
Checking and setting phantom power
Press the MENU button and select PHANTOM to
show the PHANTOM setting status for all inputs and
enable changing them.
Phantom power can be turned on for each input by
selecting it.
Setting the phantom power voltage
Options: +24V, +48V (default)
Select this according to the specications of the mic.
CAUTION
Some condenser microphones will not operate
when phantom power is set to “+24V”.
Setting plug-in power
Set this using PLUG IN POWER.
Options: OFF (default), 2.5V, 5V
When connecting a mic that requires plug-in power,
set this to “2.5V” or “5V” according to the specications
of that mic.
CAUTION
Do not turn plug-in power on unless a plug-in power
mic is connected. Other connected equipment could
be damaged by it.
See the mic operation manual for details.
NOTE
This setting is only valid when the input source
setting is “EXT”.
Compensating for delay between
dierent mic distances
Set this using DELAY.
Use this function to compensate for delays that result
from dierences in distances between connected mics.
Options: 0 (default) – 300 ms
NOTE
This cannot be used when the sampling frequency
is set to 192 kHz.
Bekijk gratis de handleiding van Tascam FR-AV4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19761 MB |
