Tascam FR-AV2 handleiding
Handleiding
Je bekijkt pagina 17 van 72
TASCAM FR-AV2 V1.00 17
4. Preparation
Using an AC adapter (sold separately)
Connect a PS-P520U AC adapter (sold separately) to the unit's
USB port.
AC outlet
USB-C plug
TASCAM PS-P520U (sold separately)
Type-A to Type-C cable
included with PS-P520U
CAUTION
o We highly recommend using the PS-P520U AC adapter (sold
separately) that is designed for use with this unit. When
using another external power supply device, use one with
the following specications.
o Supplied voltage: 5 V
o Supplied current: 1.5 A or more
Using a power supply device with specications other than
the above could cause malfunction, overheating, re or other
problems.
If trouble should occur, stop using the unit and contact the
retailer where you purchased it or a TASCAM customer support
service to request repair.
o Noise may occur when recording with a microphone if the unit
is too close to the AC adapter. In such a case, keep sucient
distance between the AC adapter and the unit.
NOTE
o If power supply selection is set to automatic, power will be
supplied from the external source when both that source and
batteries are available.
o When batteries are installed and an external power supply is
connected, if the external power supply is disconnected, the
unit will switch to operating on battery power.
Using USB bus power
Use the supplied USB cable to connect the unit and the computer
as illustrated below.
ComputerUSB cable
USB Type-C port
NOTE
o If a computer is going to be used only to supply power, a
driver does not need to be installed.
o We recommend connecting it to a USB Type-C port on a
computer or other device.
Bekijk gratis de handleiding van Tascam FR-AV2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | FR-AV2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8478 MB |
