Tascam CD-A580 v2 handleiding
Handleiding
Je bekijkt pagina 30 van 44
30
6
Press the RECORD USB button again to start recording.
When recording from an external source, you must also start
playback of that source.
If the recording source is a CD or cassette tape, that source will
automatically start playing back.
o Pressing either the USB Pause (9) or USB Play (t) button will
start recording.
The red indicator above the RECORD USB button and the
icon on the display stop blinking.
o If the USB flash drive runs out of open space during recording,
recording stops automatically.
o To pause recording, press the USB Pause (J) button. A second
press of the button resumes recording.
Pressing the USB Play (t) button will also resume recording.
You can also resume recording by pressing the source play-
back button if the recording source is a CD or tape.
Recording from a CD or a cassette tape
When source playback stops, recording also automatically stops.
To stop recording, press the USB Stop (H) button. Doing this
also stops playback of the recording source.
Recording from an external source
When source playback stops, recording does not automatically
stop. Press the USB Stop (H) button to stop recording.
Recording on a USB flash drive (continued)
Manual file division
When recording from a tape or a device connected to the LINE inputs,
you can manually divide the MP3 file as it is being recorded. This
function cannot be used when recording from a CD. A recorded CD
will automatically be divided at each track.
During recording, press the RECORD USB button at the point
where you want to divide the recorded file.
File division takes about 10 seconds.
o “File increment” appears on the display during division.
o “Record Ending” will appear when you press the USB stop (8)
button.
When recording from a tape:
During file division, the tape stops, but almost no gap in the
recording should occur.
When recording from the LINE inputs:
During file division, a gap will occur in the recording.
< This unit cannot divide an already recorded MP3 file. This function
only works during recording.
< The number at the end of the second file name will be incremented
after division.
Example (using CD-A580 v2):
If “REC001.MP3” is divided, files named “REC001.MP3” and “REC002.
MP3” are created.
Example (using CD-A580):
If “T001.MP3” is divided, files named “T001.MP3” and “T002.MP3” are
created.
Bekijk gratis de handleiding van Tascam CD-A580 v2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tascam |
| Model | CD-A580 v2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5062 MB |
