Handleiding
Je bekijkt pagina 15 van 23
EN
28 29
EN
It is essential to connect the loudspeakers using the correct polarity. Make sure to connect the “ +
” terminal of the loudspeaker (Red) to the “ + ” output terminal of the amplifier. Then, make sure
to connect the “ - ” terminal of the loudspeaker (Black) to the “ - ” output terminal of the amplifier.
A wrong connection would cause a cribled stereo image and loss of bass. Use a high-quality cable
designed for connecting loudspeakers.
2. HI-FI AMPLIFIER CONNECTIONS
ALL THE CONNECTIONS MUST BE MADE WITH THE EQUIPMENT TURNED OFF.
FRONT
R
FRONT
L
SPEAKERS
X4 X5
OR
•FR
X6
•FL
X6
Loudspeaker Enter
Description
•FR/FL FRONT RIGHT/LEFT
Loudspeaker Front right (R) /Left (L)
•First, adjust the spacing of the two loudspeakers in order to find the realistic balance between a
wide sound image (wide apart loudspeakers) and a sound image respecting the punctuality of the
voices (close loudspeakers).
•Secondly, move the loudspeakers away from the rear wall by steps of 10 cm to find the balance
between the depth of the sound image (far from the back wall) and the level of the extreme low
frequencies (close to the back wall).
•Finally, adjust the loudspeakers orientation by turning them gradually toward the center of the
listening area. If you leave the loudspeakers parallel, you may want to bring them closer together,
if you orient them more than 30°, you may increase their spacing.
~60°
> 30cm
> 30cm
•FL
•FR
Bekijk gratis de handleiding van Tangent Spectrum II X5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tangent |
| Model | Spectrum II X5 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 1920 MB |