Tach-It 3510 handleiding

Handleiding

12345678910/ 10

Afdrukken

Je bekijkt pagina 6 van 10

8. Remove the screw at the rear of the shaft, take of the encoder, use a flat head screwdriver to

remove the c-clip, remove the washer, and push the brass bushing towards the rear to pull it off.

(Note that the encoder is “keyed” with a flat side on part of the inside circle that goes onto the

shaft. When putting the encoder back, make sure the flat sides match up with each other. IT IS

VERY IMPORTANT THAT THE ENCODER IS NOT BENT. IF IT IS, THE GUN WILL NOT

WORK PROPERLY)

12345678910/ 10

Bekijk gratis de handleiding van Tach-It 3510, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd