Sygonix SY-5799002 handleiding
Handleiding
Je bekijkt pagina 4 van 8

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reects the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE. *2899501-02_v1_0923_02_dh_mh_en
Mounting in a server rack
• The power strip can be mounted in a 48.26 cm (19 inch) server rack. You can use the
included materials for mounting the power strip.
• Ensure that the on/off switch is in the off position.
• After installation, connect the switched-off devices to the earth-contact power sockets. When
doing so, pay attention to the available power ratings; see “Technical Data”. Connect the
mains plug of the power strip to a suitable mains socket.
• Remove the cover from the on/off switch. Switch on the power strip with the on/off switch. The
LED power light will go on. Replace the on/off switch cover.
• If the power strip will be out of use for an extended period of time, turn it off. The LED power
light will go out. Unplug the mains plug from the mains socket.
Care and cleaning
• Disconnect the product from the mains socket and the connected devices before cleaning
the product.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Do not immerse the product in water or other liquids.
• Use a dry, lint-free cloth to clean the product.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
• in our Conrad ofces
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up
by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
Technical data
a) Item no. 2899501
Input voltage/current ..................... 250 V/AC, 16 A
Connected load ............................ max. 4000 W
Ingress protection ......................... IP20
Power socket ................................ 8x earth-contact power sockets
On/off switch ................................. yes
Enhanced protection against
accidental contact ......................... yes
Mains cable .................................. HO5VV-F 3G 1.5 mm² / 1.8 m in length
Suitable installation ....................... 48.26 cm (19 inches), 1 U
Operating conditions ..................... -5 to +40 °C, 5 – 95 % RH
Storage conditions ........................ -5 to +40 °C, 5 – 95 % RH
Dimensions (L x W x H) ................ 482 x 45 x 45 mm
Weight .......................................... approx. 770 g
b) Item no. 2899502
Input voltage/current ..................... 250 V/AC, 16 A
Connected load ............................ max. 4000 W
Ingress protection ......................... IP20
Power socket ................................ 9x earth-contact power sockets
On/off switch ................................. yes
Enhanced protection against
accidental contact ......................... yes
Mains cable .................................. HO5VV-F 3G 1.5 mm² / 1.8 m in length
Suitable installation ....................... 48.26 cm (19 inches), 1 U
Operating conditions ..................... -5 to +40 °C, 5 – 95 % RH
Storage conditions ........................ -5 to +40 °C, 5 – 95 % RH
Dimensions (L x W x H) ................ 482 x 45 x 45 mm
Weight .......................................... approx. 770 g
Bekijk gratis de handleiding van Sygonix SY-5799002, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sygonix |
| Model | SY-5799002 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1168 MB |
