Swissonic Audio 1 handleiding
Handleiding
Je bekijkt pagina 18 van 28
Turn o DAW monitoring when using the loopback or mix function, as it may cause unwanted feedback.
4 [MONITORING] | Switch for selecting the mode
[STEREO] | Listening in stereo mode
[MONO] | Listening in mono mode
[OFF] | No direct monitoring
5 [PHONE I/O] | Connection for the smartphone headphone output, designed as a 3.5 mm jack socket (4-pin, stereo)
The audio signals of the smartphone are output internally, the audio signals of the external microphone on the audio inter‐
face are transmitted to the smartphone via this socket. Signals received via this interface cannot be recorded.
When connecting a PC and a smartphone for live broadcasting, set the [REC SOURCE] switch to [CH1-2] and the
[MONITORING] switch to [OFF] to avoid interference. The volume of the signals transmitted via this connection can now be
adjusted using the [MASTER] rotary control.
If you are only connecting a smartphone for live broadcasting, set the [REC SOURCE] switch to [CH1-2] or [MIX] and the
[MONITORING] switch to [MONO] or [STEREO] to allow normal transmission. The volume of the signals transmitted via this
connection can now be adjusted using the [MASTER] rotary control.
6 [MAIN OUTPUTS] - [RIGHT] / [LEFT] | Line outputs for connecting an amplier or an active speaker, designed as a 6.35 mm jack
socket (mono, balanced) for the left and right channels
Connections and controls
18
Audio 1
Audio interface
Bekijk gratis de handleiding van Swissonic Audio 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swissonic |
| Model | Audio 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1727 MB |
