Swissonic Audio 1 handleiding
Handleiding
Je bekijkt pagina 16 van 28
3 [GAIN] - [MIN] / [MAX] | Setting the input level on the line/instrument input
4 [PEAK] | The LED lights up green when the input level on the line/instrument input is sucient, and lights up red when the
input level is too high. This setting can be corrected with the [GAIN]controller.
5 [MASTER] - [MIN] / [MAX] | Control for adjusting the master volume
6 [PWR] | The LED lights up green when the device is powered via the USB-C port.
7 [MIN] / [MAX] | Control for adjusting the listening volume of the headphones
8 [PHONES] | Headphone output (stereo, 6.35 mm jack socket)
9 [HI-Z] | Pushbutton for setting the input sensitivity when an electric guitar or electric bass with a passive pickup is connected
to [LINE/INST]
10 [LINE/INST] | Line/instrument input, e.g. for an electric guitar, electric bass or other audio source with line signal, designed as
a 6.35 mm jack socket
11 [MIC] | Microphone input, designed as an XLR socket
12 [+48 V] | Switches the phantom power for the 48 V power supply for condenser microphones on (push button pressed) or
o (push button not pressed)
The phantom power will damage the device if unbalanced lines are connected. Only switch on phantom power if all con‐
nected cables are balanced.
Turn o the phantom power when connecting a device to [MIC] that does not support phantom power. Switch o the
phantom power when making changes to the cable connections. Turn the [GAIN] control of the input to minimum before
turning on the phantom power.
Connections and controls
16
Audio 1
Audio interface
Bekijk gratis de handleiding van Swissonic Audio 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swissonic |
| Model | Audio 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1727 MB |
