Swann SWPRO-1080MQB handleiding
Handleiding
Je bekijkt pagina 43 van 52
43
FACTORY RESETTING THE CAMERA
2. Find the factory reset procedures for your device below:
2a. For models SWIFI-2KICAM/2KOCAM/ALERTCAM/SPOTCAM/4KFLOCAM/FLOCAM/TRACKCAM/PTCAM2:
• Press and hold the Reset button for 20 seconds until the blue LED indicator turns off.
• Release the Reset button. The camera will start the factory reset process, which can take up to 2 minutes.
2b. For models SWIFI-XTRCM/4KXTRM/BUDDY/4KBUDDY/SEVDBC:
• Press and hold the SET and RST buttons simultaneously.
• Release the RST button and continue holding the SET button until the LED indicator starts blinking red.
• Release the SET button. The camera will start the factory reset process, which can take up to 2 minutes.
2c. For models SWIFI-SE2KPT/SE2KIC:
• Press and hold the Reset button for 10 seconds until the blue LED indicator turns off.
• The camera will start the factory reset process, which can take up to 1 minute.
2d. For models SWIFI-CORECAM/COREPRO:
• Make sure the Power switch is in the ON position.
• Press and hold the Reset button for 10 seconds until the blue LED indicator turns off.
• Release the Reset button. The camera will start the factory reset process, which can take up to 2 minutes.
2e. For model SWIFI-FOURTIFY4:
• Press and hold the Reset button for 10 seconds.
• Release the Reset button. You'll hear the camera say "Restore factory settings and format SD card". The camera will
start the factory reset process which can take up to 2 minutes.
2f. For model SWIFI-CAM:
• Press and hold the Reset and Pair buttons simultaneously
• Release the Reset button and continue to hold only the Pair button for another 35 seconds.
• Release the Pair button. The camera will start the factory reset process, which can take up to 2 minutes.
3. When the factory reset is complete, the camera will be in pairing mode state, indicated by the LED indicator/ring
blinking blue slowly (on certain models, you will also hear the device say "Ready for pairing").
IMPORTANT: After the device is factory reset, you'll have to pair it with your Wi-Fi network again. See "Pairing the
Device" on page 6.
SWIFI-SE2KPT SWIFI-SE2KIC
Bekijk gratis de handleiding van Swann SWPRO-1080MQB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWPRO-1080MQB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16666 MB |
