Swann SWPRO-1080MQB handleiding
Handleiding
Je bekijkt pagina 41 van 52
41
FACTORY RESETTING THE CAMERA
Factory resetting your camera is usually only necessary for troubleshooting. It isn’t something to do lightly as it
will format the internal memory/microSD card (i.e., erase all locally stored clips), wipe the current Wi-Fi pairing
information, and return all of the camera settings to the original factory defaults.
Note: Factory resetting your camera does not remove (unpair) it from your Swann Security account. If you're giving
your camera to somebody else, you can remove the device from your account via the Advanced Settings screen.
Depending on whether your camera status is online or ofine, you can perform a factory reset via the Factory Reset
button in the app or the physical Reset/Pair button located on the camera.
1. Tap the Devices tab > Select your camera > Advanced Settings.
METHOD A - VIA SYSTEM SETTINGS (IF CAMERA STATUS IS ONLINE)
—> SEE NEXT PAGE FOR METHOD B - VIA PHYSICAL RESET BUTTON
2. Tap Factory Reset then tap the Conrm button on the conrmation box that is displayed.
The camera will reset to factory defaults and restart automatically. When factory reset is complete, the LED
indicator/ring on the camera will blink blue slowly to indicate that the camera is in pairing mode (on certain models,
you will also hear the device say "Ready for pairing").
IMPORTANT: After factory resetting your device, you'll have to pair it with your Wi-Fi network again. See "Pairing
the Device" on page 6.
Bekijk gratis de handleiding van Swann SWPRO-1080MQB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWPRO-1080MQB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16666 MB |
