Swann SWNVK-AS4K650SD2 handleiding
Handleiding
Je bekijkt pagina 2 van 8
2
This installation guide will assist you in getting your NVR up and running as soon as possible. To make sure nothing was
damaged during shipping, we recommend that you connect everything and try it before you do a permanent installation.
Español: Esta guía le ayudará a conseguir su NVR funcionando tan pronto como sea posible. Para asegurarse de que nada
se dañó durante el envío, le recomendamos que conecte todo y lo pruebe antes de realizar una instalación permanente.
Français: Ce guide vous aidera à mettre votre NVR en marche dès que possible. Pour s’assurer que rien n’a été endommagé
pendant l’expédition, nous vous recommandons de tout connecter pour essayer avant de faire une installation permanente.
Step/Paso/Étape: 1
Status LEDs
Green: Your NVR has power.
Blue: Your NVR has a storage device.
Red: Your NVR is connected to
your home network either wired
(Ethernet) or via Wi-Fi.
12V
resetreset
Mouse
Backup
Mouse
Backup
StorageStorage
LANLAN
1 2 3
4
6
7
5
1. HDMI Port
2. Ethernet Port
3. USB Port
4. Reset Button
5. USB Port
6. MicroSD Slot
7. Power Port
An additional battery is included that can
be inserted into the rear of your NVR to
charge. Remove the safety sticker on
the battery and insert it until it clicks into
place. A red LED indicates charging, and
a green LED indicates a full charge.
Attention: Inserting the battery will power your NVR, so we
recommend that you do this once the initial setup has been
completed in this quick start guide. It can also be used as
backup power (up to five hours) in case of a power outage.
Bekijk gratis de handleiding van Swann SWNVK-AS4K650SD2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWNVK-AS4K650SD2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1079 MB |
