Swann SWNVK-88980W4 handleiding
Handleiding
Je bekijkt pagina 18 van 140
18
Click for contents
Display: Image Control - Settings
Channel: Select a camera that you would like to edit.
IR-CUT Mode: Lets you choose how the camera handles color and how it
manages the transition from daytime to night-time and vice versa:
→ GPIO Auto: This will instruct the camera to switch automatically from
“Color Mode” to “Black White mode” and vice versa.
→ Color Mode: This will instruct the camera to operate in color mode only.
In low light conditions, the color will be quite faint. Image clarity will also
be reduced in low-light conditions.
→ Black White Mode: This will instruct the camera to operate in black &
white mode only.
IR-Cut Delay: Controls the delay of the IR cut filter when transitioning from
daytime to night-time. The default setting will be suitable for most camera
locations but can be adjusted if needed. Click and hold the slider left or right
to change. The higher the number, the greater the delay.
IR-LED: This allows you to turn off the infrared LEDs if required.
Lens Flip & Angle Flip: Turn the image upside down and/or horizontally re-
verse the orientation of the image.
Corridor Mode (NHD-885/886 only): This allows you to make better use of
the camera’s vertical angle for an optimised view of long, narrow scenes.
Enable this if your camera is viewing a narrow corridor.
Angle Rotation: Rotate the image by 90°, 180° and 270°.
(continued on next page)
15/11/2021 06:29:03 PM
Channel 6
Bekijk gratis de handleiding van Swann SWNVK-88980W4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWNVK-88980W4 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 71508 MB |
