Swann SWNVK-889808 handleiding
Handleiding
Je bekijkt pagina 31 van 51
31
WI-FI CAMERA SETTINGS
The name of the camera. You can tap to change it.
The connection status of the camera. Note: If the device is not
"Online", check your Wi-Fi/internet connection and the device's
battery level/power connection.
The timezone (GMT format) of the camera. The date and time
stamp of camera recordings will be based on the selected
timezone. You can tap
to change the timezone. There is also the
option to sync the camera to your phone's timezone.
Shows the current battery level (%).
This setting is enabled by default to optimize power consumption,
which helps prolong the camera's battery life. Disabling this setting
may result in faster performance but higher battery drain.
When the app is launched, you have the option to choose whether
or not the camera should be automatically woken up from sleep.
The signal strength of the Wi-Fi network the camera is currently
connected to. The signal strength is represented as a percentage,
and the closer the camera is to your Wi-Fi router or access point,
the higher the percentage and the more reliable and faster the
wireless connection between devices. A camera located far from
the router or access point, without a strong wireless connection,
may drop off the network from time to time, resulting in problems
with video streaming.
When the app is launched, you can choose how the Live View tab
starts the camera's live stream. You can select 'Always' to start the
live stream all the time, select 'Wi-Fi only' to start the live stream
only when your phone is connected to Wi-Fi, or select 'Never' to
never start the live stream.
The name (SSID) of the Wi-Fi network to which the camera is
connected. If you have multiple Wi-Fi networks in your home, you
can tap
to change the Wi-Fi connection the camera is using.
For more information, see "Changing the Camera's Wi-Fi Network"
on page 40.
2
3
6
7
8
4
5
9
1
1
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
Adjust the camera's video and audio settings such as the live view
quality and mic volume. See "Camera Settings" on page 32.
Adjust the camera's detection settings such as the motion detection
sensitivity and light duration. See "Detection Settings" on page 33.
Set up motion detection mask to reduce false motion triggers.
See "Motion Detection Mask" on page 34.
Perform general maintenance such as rebooting the camera,
resetting camera settings, formatting the internal storage, and
factory reset. See "Advanced Settings" on page 36.
Access recordings stored on the camera's local microSD card.
Check for rmware updates. New rmware may from time to
time be available for your camera to improve the performance, x
bugs, or roll out new features and enhancements.
View technical information about the camera such as the model
code, rmware version, installation date, and MAC address.
Adjust the camera's pan and tilt speeds.
Set up and manage face recognition proles on the camera.
See "Facial Recognition" on page 35.
Remove (unpair) the camera from your Swann Security account.
In some cases, you might need to unpair your camera, for
example, if you give away your camera to a family member, you
need to unpair it rst.
11
12
13
14
15
16
18
19
17
10
The settings available vary depending on the device and will only appear
if the feature is supported.
8
18
19
Bekijk gratis de handleiding van Swann SWNVK-889808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWNVK-889808 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 17059 MB |
