Swann SWDVK-846808MQBWF handleiding
Handleiding
Je bekijkt pagina 9 van 97
9
Click for contents
Live View Controls
Menu Bar
1. This is the Start button. Click to reveal additional functions available (see
dialogue box below).
2. Four camera view.
3. Nine camera view (this will display eight cameras on the 8 channel model).
4. Click this to select from one of the multi-screen viewing modes available.
5. Click this to repeatedly cycle through each video channel full-screen. Each
video channel will be displayed for five seconds.
6. Click the larger button to access the Search menu. From here you can play
previously recorded videos. Click the smaller button to play recent events (up
to the last five minutes).
7. Click this to change the volume or mute the audio (click the speaker icon
to mute).
8. This icon indicates that your DVR is connected to your modem or Wi-Fi
using the supplied Ethernet cable.
9. Click this to enter Manual Record mode. When enabled this will bypass the
current recording schedule.
10. Click this to enter the Startup Wizard.
The 16 channel model has additional camera views available (twelve
and sixteen camera views).
Search: Click to search and play recorded
videos (hard drive & USB), view snapshots,
and access system log files.
Setup: Click to access the Main Menu.
Unlock: Click to unlock your DVR. If the
Menu Timeouts function is disabled, click
to lock your DVR to prevent access.
Shutdown: Click to shutdown, reboot or
logout of your DVR. Always shutdown your
DVR when disconnecting the power.
Main Menu Camera Toolbar
To access the camera toolbar, left-
click a camera to display.
1. While viewing the camera, click
to start a manual recording (the
icon will turn red indicating that it
is recording). Click again to stop.
2. Click to take a snapshot.
3. Click to play back the last re-
cording saved (recording must be
saved in the last five minutes).
4. Click to access controls for the
camera’s on-screen display and to
control a PTZ camera.
5. Click to enter Zoom mode.
6. Click to adjust image settings.
7. Click to enable the camera’s si-
ren and spotlight (if supported).
8. Click to add a Tag when record-
ing. Tagging allows you to record
information within the video.
1 2 3 4 5 6 7 8
Bekijk gratis de handleiding van Swann SWDVK-846808MQBWF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SWDVK-846808MQBWF |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 43790 MB |
