Swann SRDVR-85680W handleiding
Handleiding
Je bekijkt pagina 67 van 97
67
Click for contents
Network: Port Configuration & RTSP
In most circumstances there is no need to change the settings here. The fol-
lowing is for advanced users only.
Web: This port is used to log into your DVR via your network or remotely. The
default port number (85) is seldom used by other devices, however if you have
another device using this port, you may need to change it. An alternative port
number to use is 90.
Client: This is the internal port that your DVR will use to send information
through. This particular port number (9000) is not used by many devices,
however if you have another DVR-like device, you may need to change it
RTSP: This port can be used to stream a camera’s live view image to your
computer, using video streaming software such as VLC media player (see
page 68 - Using RTSP for more information).
HTTPS: The same as HTTP Port but with an additional layer of security. The
default port number (443) is seldom used by other devices.
UPNP: A network protocol designed to allow network-connected devices to
automatically configure the router for remote access. Click the checkbox to
enable (not required to be enabled when using UID).
→ Click “Default” to revert to default settings.
→ Click “Apply” to save settings.
The cog symbol (top right) indicates functions
suitable for experienced users, and or some
networking knowledge is required.
Bekijk gratis de handleiding van Swann SRDVR-85680W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Swann |
| Model | SRDVR-85680W |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 43790 MB |
