Handleiding
Je bekijkt pagina 14 van 20
ADVANCED SUBWOOFER CONTROLS
Volume
Adjust to make your system’s low end more powerful and extended while remaining accurate.
The subwoofer should sound like it’s naturally adding bass for all the speakers without overly
drawing attention to itself. Different content has different levels of output so it’s normal to adjust
volume based on source material and your personal listening preferences.
Low Pass Filter
Enables smooth sonic transition and flat frequency response between speakers and the
subwoofer. This allows you to control the upper frequency cut-off to blend with main speakers.
It also allows you to adjust slope, or the rate at which the low pass filter rolls off. If using an AV
Receiver with a Subwoofer Output, leave in the OFF position.
Phase Adjustment
Solves sound wave cancellation issues at specific frequencies and perfectly aligns the arrival of
output from speakers and subwoofers to your listening position. Normally set to 0° if the
subwoofer is near the main speakers. Adjusting Phase shifts timing of the subwoofer output to
align with the main speakers or additional subwoofers.
Polarity (SVS App Only)
In some cases, reversing polarity solves dips or humps at the crossover frequency between a
subwoofer and speaker and can be used to fix bass nulls or overly boomy spots in the listening
area. Reversing the electrical polarity of the subwoofer amplifier makes it so the woofer moves
in when speaker drivers move out and is normally set to positive.
SVS Subwoofer Auto Room Correction (Coming Soon - SVS App Only)
Using the SVS app and the built-in microphone on your smartphone or an external mic, the
feature applies equalization filters, capitalizes on available room gain, and optimizes in-room
frequency response at main listening positions for optimal in-room performance.
The simple process requires just a few steps and can have a profound effect on performance.
Auto room correction will be available via an over-the-air app and firmware update coming soon.
Parametric EQ (SVS App Only)
Powerful tool for removing peaks and dips in your listening area, and for creating custom
subwoofer output based on personal listening preferences. Works best when used with acoustic
measurements.
Allows you to set the desired center frequency of the filter, increase or decrease the SPL dB of the
filter, or adjust the bandwidth of the filter.
Room Gain Compensation (SVS App Only)
Fixes bloated sounding bass by optimizing low frequency output and extension when too much
sound wave density is being created by a small room.
SB-5000 R|Evolution
SUBWOOFER
Bekijk gratis de handleiding van SVS R|Evolution SB-5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SVS |
| Model | R|Evolution SB-5000 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2887 MB |