Sven GC-W650 handleiding
Handleiding
Je bekijkt pagina 6 van 20

ENG
6
Game racing
wheel
8. FUNCTIONAL KEYS
Consoles
Press the "MODE" button in the main menu of the PS3/PS4/XBOX 360/XBOX ONE consoles
and launch settings.
PC
MODE button: X-Input by default. Press "MODE" for 3 seconds to change the X-input and D-in-
put modes.
Sensitivity adjustment of the steering wheel
Press the "PROG" button, the indicator will ash quickly, press the D-pad button down to set
the low sensitivity mode.
Press the "PROG" button, the indicator will ash quickly, press the D-pad button left or right
to set the medium sensitivity mode.
Press the "PROG" button, the indicator will ash quickly, press the D-pad button up to set
the High sensitivity mode.
Calibration
Press "L1+L2+R1+R2" simultaneously, the indicator will start ashing quickly, turn the steering
wheel to the left until bumping, the indicator will ash slowly, then turn the steering wheel
to the right until bumping, the indicator will ash slowly, then return the steering wheel
to the central position, the indicator will ash quickly, press the right pedal until bumping,
release, press the left pedal until bumping, the indicator will ash slowly, release it to make
the indicator ash quickly. When the indicator starts ashing slowly again, press the "OPTIONS"
button to complete the calibration. The indicator will light up continuously.
Buttons reassignment
The functions of the buttons on the steering wheel can be changed, they can be assigned
the following meanings:
Assignable buttons: □/1/X/Y, ○/3/B/A, △/4/Y/X, X/2/A/B, L1/5/LB/L, L2/7/LT/ZL, R1/6/RB/R,
R2/8/RT/ZR.
Programmable buttons: left-hand steering lever (L2/7/LB), right-hand steering lever (R2/8/RB), gas
pedal (X/2/Y+), brake pedal (□1/Y-), L3/11/SL, R3/12/SR. (keys that can be assigned a new meaning).
Press the "PROG" button, the indicator on the steering wheel will start ashing red quickly,
press the gas/brake pedal, left-hand steering lever or right-hand steering lever, the indicator
will start ashing red slowly, press the assigned key, the indicator will go out, this will mean that
the change was successful.
To clean all the programmed buttons and sensitivity, you need to press "PROG", the indicator
on the steering wheel will start ashing quickly, press and hold the OPTIONS/10/MENU/+ but-
ton for 4 seconds, the LED indicator will light up continuously, all functions and programmed
keys will be reset to the factory settings.
Note: The program settings will be saved after the power is switched o.
Press the "PROG" button, the red LED will ash quickly, press the "PROG" button again to exit
the setting mode, and the output will be performed automatically if there are no actions
for 10 seconds.
9. CONNECTION
Connection to PS3
Connect the steering wheel to the PS3 console and connect the pedals to the steering wheel,
switch the PS3 console power on. The active channel indicator will light up when the connection
is completed automatically.
Bekijk gratis de handleiding van Sven GC-W650, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Sven |
Model | GC-W650 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 2715 MB |