SurgeX SA-20-AR handleiding
Handleiding
Je bekijkt pagina 8 van 27
SA-20-AR User Manual
______________________________________________________________________________
© 2019 AMETEK Electronic Systems Protection | Technical Support 1-800-645-9721 | surgex.com 7
Example: Telnet to default IP address of 192.168.1.254 on default Port 23:
SurgeX Axess Ready v1.01.41
User> admin
Password> *****
Axess Ready> set ipaddress 10.1.2.69
Ok
Axess Ready Reboot Required> set subnet 255.255.255.0
Ok
Axess Ready Reboot Required> set gateway 10.1.2.1
Ok
Axess Ready Reboot Required> reboot
The CLI command set ipmode dhcp followed by a reboot command may be used to
configure the AR to automatically acquire its network settings from a DHCP server. A
DHCP server will automatically assign an IP address (dynamic address), as well as the
Subnet Mask and Gateway.
To determine what IP address has been automatically assigned by the DHCP server, you
will need to use the Discover feature of the DMU or query your DHCP server and locate
the MAC address of the AR in the DHCP server’s IP/MAC table.
o Web: To set the IP address using a web browser, navigate to the current IP address of the
AR. Enter the administrator credentials (Factory Default User: admin, Password:
admin), click on “Setup”, then click on “Network” and follow the directions in the Web
Server/Network/Setup section of this manual.
Bekijk gratis de handleiding van SurgeX SA-20-AR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SurgeX |
| Model | SA-20-AR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
