Supermicro X14SBT-GAP handleiding
Handleiding
Je bekijkt pagina 106 van 142
l
Interface Name
l
Interface Type
l
MAC address
l
Host address
l
Route Table
l
Gateway addresses
l
DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The string
format is colon separated. The default setting is the MAC address above.
DAD Transmit Count
Use this feature to set the number of consecutive neighbor solicitation messages have been
sent while performing duplicate address detection on a tentative address. The default setting
is 1.
Policy
Use this feature to select how the policy is to be configured. The options are automatic and
manual.
►Advanced Configuration
Note: This submenu is available when "Policy" is set to manual.
New IPv6 address: Use this feature to enter the IPv6 address for the local machine.
New Gateway addresses: Use this feature to set the gateway address for the local
machine.
New DNS addresses: Use this feature to set the DNS server address for the local
machine.
Commit Changes and Exit: Press <Enter> to save changes and exit.
Discard Changes and Exit: Press <Enter> to discard changes and exit.
Save Changes and Exit
Press <Enter> to save changes and exit.
106
X14SBT-GAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBT-GAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBT-GAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15560 MB |
