Supermicro X14SBH-AP handleiding
Handleiding
Je bekijkt pagina 86 van 140
and Auto.
Note: This feature is NOT available when "Workload Profile" is set to I/O, Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
LTR IIO Input
Use this feature to set the MSR 1FCh Bit[29]. The options are Take IIO LTR input and Ignore
IIO LTR input.
CPU1 Core Disable Bitmap Menu
►CPU1 Core Disable Bitmap
Disable Bitmap[0]:
Enter 0 to enable this feature for CPU Core Bitmap[0]. Enter FFFFFFFFFFF to disable CPU
Core Bitmap[0]. Please note that the maximum CPU cores are available in each CPU package
and at least one core per CPU must be enabled. Disabling all cores is not allowed. The default
setting is 0.
Disable Bitmap[1]:
Enter 0 to enable this feature for CPU Core Bitmap[1]. Enter FFFFFFFFFFF to disable CPU
Core Bitmap[1]. Please note that the maximum CPU cores are available in each CPU package
and at least one core per CPU must be enabled. Disabling all cores is not allowed. The default
setting is 0. This feature is available when the number of CPU cores is greater than 128.
Chipset Configuration Menu
►Chipset Configuration
Important: Setting the wrong values in this section may cause the system to malfunction.
Uncore Configuration Menu
►Uncore Configuration
The following information is displayed.
l
Number of CPU
l
Current UPI Link Speed
l
Current UPI Link Frequency
l
Global MMIO Low Base / Limit
86
X14SBH-AP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBH-AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBH-AP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17647 MB |
