Supermicro X14SBH-AP handleiding
Handleiding
Je bekijkt pagina 85 van 140
CPU C State Control Menu
►CPU C State Control
Note: This submenu is available when “Power Performance Tuning” is set to BIOS Controls
EPB.
Monitor MWAIT
Select Enabled to support Monitor and Mwait, which are two instructions in Streaming SIMD
Extension 3 (SSE3) to improve synchronization between multiple threads for CPU performance
enhancement. The options are Disabled and Enabled.
Note: This feature is NOT available when "Workload Profile" is set to Telco NFVI, Telco
NFVI-FP, or Telco FlexRAN.
ACPI C1 Enumeration
Use this feature to select the ACPI C1 state or the ACPI C1e state. The options are C1 and
C1e. This feature is CPU-dependent. (ACPI is the abbreviation for Advanced Configuration and
Power Interface.)
Note: This feature is available when "Workload Profile" is set to Disabled.
ACPI C6x Enumeration
Use this feature to configure C6 state or C6 P-state as ACPI C2 or ACPI C3 state. The options
are Disabled, C6S as ACPI C2, C6S as ACPI C3, C6S-P as ACPI C2, C6S-P as ACPI C3, and
Auto.
Note: This feature is available when "Workload Profile" is set to Disabled.
Package C State Control Menu
►Package C State Control
Note: This submenu is available when “Power Performance Tuning” is set to BIOS Controls
EPB.
Package C State
Use this feature to optimize and reduce CPU package power consumption in the idle mode.
Please note that the changes you've made in this setting will affect all CPU cores or the circuits
of the entire system. The options are C0/C1 state, C2 state, C6 (non Retention) state, No Limit,
85
X14SBH-AP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14SBH-AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBH-AP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17647 MB |
