Supermicro X14SBH-AP handleiding
Handleiding
Je bekijkt pagina 61 van 140
1. First power down the system and unplug the power cord(s).
2. Remove the cover of the chassis to access the motherboard.
3. Remove the onboard battery from the motherboard.
4. Short the CMOS pads, JBT1, with a metal object such as a small screwdriver for at least
four seconds.
Note: Clearing CMOS will also clear all passwords.
5. Remove the screwdriver (or shorting device).
6. Replace the cover, reconnect the power cord(s), and power on the system.
Onboard TPM Enable/Disable
Use JPT1 to enable or disable the onboard TPM.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
TPM Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1–2 Enabled (Default)
Pins 2–3 Disabled
UID LED and System_Reset Button Select Jumper
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
LED Indicators
For information about the LED indicators on the X14SBH- AP motherboard, refer to the
following content.
BMC Heartbeat LED
A BMC Heartbeat LED is located at LED3 on the X14SBH-AP motherboard. When this LED is
blinking, the BMC is functioning normally.
For a detailed diagram of the X14SBH- AP motherboard, see the layout under "Quick
Reference" on page 12.
61
X14SBH-AP: Component Installation
Bekijk gratis de handleiding van Supermicro X14SBH-AP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14SBH-AP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17647 MB |
