Supermicro X14DBT-FAP handleiding
Handleiding
Je bekijkt pagina 98 van 137
Super IO Configuration Menu
►Super IO Configuration
The following information is displayed.
l
Super IO Chip
Note: This submenu is available when your system supports this feature.
Serial Port 1 Configuration Menu
►Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable serial port 1. The options are Disabled and Enabled.
Device Settings (Available when "Serial Port 1" above is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial port
1.
Change Settings (Available when "Serial Port 1" above is set to Enabled)
Use this feature to specify the base I/O port address and the Interrupt Request address of serial
port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to serial
port 1. The options are Auto, (IO=3F8h; IRQ=4;), (IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;),
(IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;), (IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;), and (IO=2E8h;
IRQ=3,4,5,6,7,9,10,11,12;).
Serial Port 2 Configuration Menu
►Serial Port 2 Configuration
Note: It can be "Serial Port 2 Configuration" or "SOL Configuration" based on your system
support.
Serial Port 2/SOL ("Serial Port 2" or "SOL" based on your system support)
Select Enabled to enable serial port 2 (or SOL). The options are Disabled and Enabled.
Device Settings (Available when "Serial Port 2/SOL" above is set to Enabled)
This feature displays the base I/O port address and the Interrupt Request address of serial port
2 (or SOL).
98
X14DBT-FAP/-FLAP: UEFI BIOS
Bekijk gratis de handleiding van Supermicro X14DBT-FAP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Supermicro |
| Model | X14DBT-FAP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14774 MB |
